Across today’s highly connected and data-driven business landscape, the need for continuous, clean power cannot be overstated. Even the briefestdowntime can be devastating to an organization, regardless of its size or vertical. Theprice tag for downtimeisestimatedat $5,600 per minute,andunplanned incidents can result in equipment damage, data loss, missed opportunities and tarnished reputation.
Thankfully, anuninterruptible power system (UPS)is one of thesimplest, mostcost-effective solutions to help companies avoid the unwelcome consequences of downtime. But with severaltypes of systems available, the challenge is selectingone that best matches your needs and budget.
What Is a UPS System?
A UPS system is a backup solution that supplies power in the event of a utility failure. By supplying an adequate window to safely shut down sensitive equipment,a UPS helps prevent data lossand minimizes the stress of a hard shutdown on electronics.
Protecting equipment against a complete power loss isn’t the only reason you need a UPS. Depending on the UPS model, these systems also shield connected devices from common power problems and unsafe output voltage fluctuations that can damage electronics, reduce lifespan and affect performance.
How Does a UPS Work?
How DoesaUPS Work?
A UPS works by converting AC power to DC power and storing it in a battery. Then, it converts the DC power back to AC power,running it to your building’s AC outlets.Your connected devices will continue to operate on the storedbattery power, giving you time to save your work and shut down the computer.
Essentiallya battery in a box, a UPS powers the devicesplugged into its AC outlets whenelectricity flowdrops to an inadequate voltageora complete outage occurs. In a power emergency, the UPS electrical system instantly switches to the battery to provide a continuous power source for the length of the battery, which varies by system for periodsranging from minutes to hours.Additionally, the conversion process removes most of the line noise from the AC outlet.
Depending on the size and technology of the unit, a UPScan protecta single computer up to an entire data center. Essential formission-critical environments, a UPS keeps computer systems and IT equipment safe and operational during a power loss until generators can be activated or protected devices,such as servers and network components,can be properly shut down.This helps prevent lost data while saving work-in-progress.
In addition to delivering backup power during a utility failure, UPSs also afford varying degrees of protection against other damaging power problems, including:
- Voltage sags
- Surges
- Brownouts
- Line noise
- Frequency variations
- Overvoltage conditions
- Switching transients
- Harmonic distortion
Types of UPS Systems
UPS systems are not created equal. Rather, there are three primary topologies—standby, line-interactive and online.EachUPS topologydelivers varying levels of protection against power problems, achieving the result in a unique manner while placing differing frequency demands on the battery.
Standby UPS
Alsocalledan“offline”or“passive”UPS, standby technology offers the most basic type of protection, allowing equipment to runonincoming utility power until it detects a problem. In a standby UPS model, connected devices receive utility power through a direct AC connection. The unit essentially remainson hold until backup power is needed.
A standby UPS will switch tothebattery to safeguard connected equipment when power fails, as well as adjust for routine sags and surges. The transfer time generally occurs in milliseconds after a power loss, and although the switch is not instantaneous,itusually won’tinterrupt the flow of power to equipment. If a lengthy outage is expected, theUPS’sbattery backup powerwill allow for safe shutdowns so equipment and data remain protected.
Because standby topology does not buffer equipment against other common power anomalies, it is best suited for non-critical and less demanding home network and office environments that arenot subjected to frequent disruptions. While standby UPSs are the least expensive type,the downside to this topology is that it frequently resorts to the battery, which can reduce runtime and service life.
Line-Interactive UPS
A UPS with line-interactive topology is designed to shield connected devices from power failures, sags and surges like a standby model,while alsoprotectingagainst voltage spikes anddrops.
Typically used to safeguard enterprise network and IT applications, the line-interactive UPS is controlled by a microprocessor that monitors the quality of incoming power and reacts to fluctuations. In addition to providing more protection than standby UPSs, line-interactive units offer better power conditioning and regulation,helpingprolong battery life.
One of the biggest advantages of line-interactive topology is that it compensates for undervoltage and overvoltage circ*mstances without using the batteries. Under normal power conditions, line-interactive UPSs pass input power to connected equipment through a surge/noise filter and voltage regulator, while an inverter charges the battery foremergency useduring an outage.
However, if the voltage fluctuates outside of a safe window, the UPS relies on built-in automatic voltage regulation (AVR) to increase or decrease the output voltage to an acceptable level. As long as the input voltage remains within a safe range, line-interactive UPSsregulate the output voltage without using battery power.
This advantage prevents frequent switching tothebattery, which can drain reserve power intended for an outage and reduce battery lifespan. During an outage, the line-interactive UPS converts the stored battery power into regulated AC output power to support the connected equipment load.
Online UPS
While standby and line-interactive UPS models provide varying degrees of power conditioning, an online or double-conversion UPS is designed to deliver continuous protection against all nine of the most common power problems, supplyingconsistent,clean power regardless of any incoming instabilities.To create a power supply without any electrical interference, the output voltage of an online UPS is entirely regenerated by a sequence of AC to DC conversion, followed by DC to AC conversion.
During erratic power or fleeting disturbances when AC input power falls outside of preset tolerances for line-interactive mode, the online UPS switches to online double-conversion mode, completely isolating equipment from incoming power. If power fails altogether, or the input power exceeds the tolerances of the rectifier, the UPS will rely on the battery to keep loads operating, then convert back to high-efficiency mode when it is safe.
Online UPSs are the optimal choice for mission-critical applications or those involving highly sensitive equipment, such as data centers, communications hubs and other installations where continuous, clean power is a business-critical requirement. They are also beneficial inenvironments that are particularlyprone to dirty power.
Benefits of a UPS Power Supply
There are numerous benefits to deploying a UPS, including:
1. Minimized Effects From Power Outages
UPSsprotect against utility power failures, whichoccuron a dramatically increasing basis. Whileoutagescanresult froma wide variety of issues — including automobile accidents, animal interference and overtaxed power grids — severe weather ranks as thetopcause of power failuresin theUnited States.From hurricanes to heatwavesand flooding to freezing rain, weather is leaving organizations in the dark for longer than it has in the past,largelydue to climate change fueling more violent storms.
2. Protection Against Power Variances
In addition to keeping equipment operational during a power loss, a UPS also acts as a filter to shield devices against variances in the power supply, which candamagesensitive equipment like computers and network gear.
Depending on the topology, a UPS allows only a steady stream of clean power to reach attached devices, helpingsafeguard against common power anomalies that can damage equipment.Additionally, battery backup prevents data loss and provides time to save workinprogress during outages, surges or other power variances.
3. Increased Peace of Mind
Finally, a UPS provides confidence that your organizationcanavoid the financial cost, customer frustration and business disruption caused by network downtime — and you can’t put a price tag on peace of mind. Whether protecting a network closet, a few server racks or an entiredata center, it is imperative tosafeguard against equipment damage, downtime and data loss.
FindUPSs From Unified Power
It’s more critical than everfor organizations of every size to protect their operations against theimpacts of downtime. While all three UPS topologies outlined above meet the input voltage requirements for IT equipment, there are significant differences in both performance and demands on the battery.
The best topology for your organization depends onnumerousfactors, including the level of reliability and availability required, the type of equipment being protected and the overall application/environment. If you need assistance determining the optimal topology andUPS modelfor your environment,Unified Power can help you compare and identify systems.Contact us todayand let us know how we can help!
