- Manuals
- Brands
- HUANUO Manuals
- HNDS7
- Instruction manual
Monitor desk mount
Hide thumbs
-
- Bookmarks
Advertisem*nt
Quick Links
Download this manual
Monitor Desk Mount
English
--------------------------------- 01-11
Deutsch
--------------------------------- 12-21
Français
--------------------------------- 22-31
Español
--------------------------------- 32-41
Italiano
--------------------------------- 42-51
日本語
--------------------------------- 52-61
Website:
www.huanuoav.com
Instruction Manual
Thank you for choosing this HUANUO product! At HUANUO
we strive to provide you with the best quality products and
services in the industry. Please share your experience of our
product with others at www.huanuoav.com/reviews if you are
satisfied. Should you have any issues, please don't hesitate to
contact us at
Technical Support:
(US/CA)1-800-556-0533 Mon-Fri 8am - 8pm(PST) (USA)
(CAN)
(US/CA)44-808-196-3874 Mon-Fri 2pm - 10pm(UTC)
Other Info:
support@huanuoav.com(US/CA)
support_eu@huanuoav.com(DE/UK/FR/IT/ES/NL/SE/AU/PL)
support_jp@huanuoav.com(JP)
V2.0
Model: HNDS7
Advertisem*nt
Subscribe to Our Youtube Channel
Related Manuals for HUANUO HNDS7
-
Gas spring dual and single monitor mount (4 pages)
-
Gas spring dual and single monitor mount (4 pages)
-
Desk monitor arm (32 pages)
-
Monitors desk mount (14 pages)
-
(12 pages)
-
Desk monitor arm (15 pages)
-
Monitor desk mount (16 pages)
-
Gas spring monitor mount trouble-shooting (5 pages)
-
Full motion desk mount (12 pages)
-
Monitor desk mount (11 pages)
-
Monitor arm reinforcement plate (2 pages)
-
Desk monitor arm (12 pages)
-
Monitor desk mount (8 pages)
-
Monitor stand (6 pages)
-
(10 pages)
-
Wall monitor arm (64 pages)
Summary of Contents for HUANUO HNDS7
- Page 1 --------------------------------- 42-51 日本語 --------------------------------- 52-61 Thank you for choosing this HUANUO product! At HUANUO we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.huanuoav.com/reviews if you are satisfied.
-
Page 2: Weight Restrictions
IMPORTANT SAFETY INFORMATION • Please carefully read all instructions before attempting installation. If you do not under- stand the instructions or have any concerns or questions, please contact our customer service at support@huanuoav.com. • CAUTION: Avoid potential personal injuries and property damage! •... - Page 3 Product Features 360° 360° Clamp Mounting Grommet Mounting...
- Page 4 TENSION ADJUSTMENT SHOULD BE DONE ONLY AFTER MOUNT INSTALLATION Do not adjust tension without monitor. 1. Ensure monitor has been attached to the mount. 2. Read your monitor box or manual to find out monitor net weight. 3. Ensure the net weight of monitor (including accessories) is between 4.4~26.4 Ibs (2-12 kg).
- Page 5 Tools Needed (Not lncluded) Drill Bit Electric Drill (Optional) (Optional) 0.4 in.(10mm) - 1.1 in.(27mm) Phillips Screwdriver Supplied Parts and Hardware Warning :This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and und amaged. Do not use damaged or defective parts.
- Page 6 Supplied Parts and Hardware for Step 2 Arm Extender 1/8 in.(3mm) Small Allen Key Supplied Parts and Hardware for Step 3 Monitor Plate φ16xφ8.2x1.5mm M8x38mm 13/64 in.(5mm) Washer (x2) Bolt (x2) Large Allen Key Supplied Parts and Hardware for Step 4 M4x12mm M4x30mm L13mm...
- Page 7 B. For Grommet Mounting Warning: Ensure bolt is secured firmly. Ensure nut is secured firmly. If there is no grommet hole on your desk, position the base [05] on the mounting surface and mark the hole. Drill a hole using the drill bit in a diameter of 0.4 in.(10mm) - 1.1 in.(27mm) at the marked position through the mounting surface.
- Page 8 2. Install the Arms Small Allen Key Do not over-tighten set the Small Allen Key screw [M] in order not to affect the rotation of the arm. 3. Install the Monitor Plates Large Allen Key Attach the monitor plate [06] from the sides of the top end of arm [01], then secure the monitor plate using bolt and washer [G]...
- Page 9 4. Attach Monitors to the Arms 4-1 Choose Proper Bolts 4-2 Install Monitors to the Arms Flat back monitor 0.1-0.2in.(3-5mm) spacing left Phillips Screwdriver [Not Included] Curved back monitor The tension is preset at 8.8-11 LBS(4-5kg). After hanging the monitor to the mount, please release the monitor slowly to 75 mm ≈...
- Page 10 Fig. ① Large Allen Key 1 rotation ≈ 1 lb 6. Rotation Restriction Proper usage directions Non-proper usage directions...
- Page 11 7. Tilt Adjustment 4. Route Cables along the Arm Adjust monitor to proper tilt angle, using Allen key (F) to tighten the bolt and fix tilt angle Large Allen Key 8. Route Cables along the Arms...
- Page 12 Pull down the groove part along the arm to detach the cover from the arm Pinch the both sides of the top end of the cover to make it attach to the arm...